Die Compatibility Information
Use these charts as a guide to the dies that are compatible with specific machines.
Standard Steel-Rule Dies (.937")
| Machine Type | Maximum Die Size | Compatible with Pinnovation Dies* |
| AccuCut GrandeMARK 2 and Original GrandeMARK | 15" x 18" (Giant) with Standard Tray 26" x 13 3/4" (Super Giant) with Super Giant Tray |
Yes |
| AccuCut MARK IV | 9 3/4" x 15" (Super Jumbo) | No |
| AccuCut MARK III | 5" x 12" with Standard Tray 5" x 15" with Extra Long Cut Tray |
No |
| AccuQuilt Studio 2 Fabric Cutter and Original Studio Cutter |
15" x 18" (Giant) with Standard Tray 26" x 16 3/4" (Super Giant) with Super Giant Tray |
Yes |
| Sizzix Big Shot Pro | 9 3/4" x 15" (Super Jumbo) or 12" x 12" (Big) with Standard Tray 26" x 9 3/4" (Super Long Cut) with Extended Tray |
Yes |
| Ellison SuperStar Excel | 9 3/4" x 15" (Super Jumbo) or 12" x 12" (Big) with Standard Tray 26" x 9 3/4" (Super Long Cut) with Extended Tray |
Yes |
| Ellison Prestige Pro and XL LetterMachine | 5" x 15" (Extra Long Cut) | No |
| Ellison RollModel | 9 3/4" x 15" (Super Jumbo) or 12" x 12" (Big) Not compatible with dies with crease blade. |
No |
| Craftwell eBosser | 5" x 15" (Extra Long Cut)
Not compatible with dies with crease blade. |
No |
* Pinnovation dies include registration pins.
Standard steel-rule dies also work in clicker presses. Any commercial die-cutting press with adjustable pressure settings that accept dies with .937" blade height should work with our steel-rule dies. You will need to verify that your machine/press is compatible with the die board size you are interested in. Some machines/presses are not compatible with registration pins.
Compatible CUTTING PLASTIC & CUT & CREASE Mats
when using an AccuCut grandemark 2 machine
or accuquilt Studio 2 Fabric Cutter
|
Die Size |
Compatible Cutting Plastic | Compatible Cut & Crease Mat |
| 5 7/8" x 4 7/8" (Small) | 60000 | CM210 |
| 11 3/4” x 4 7/8 (Long Cut) | 60001 | CM220 |
| 15” x 4 7/8” (Extra Long Cut) | 60001 | CM220 |
| 9 3/4” x 11 3/4” (Jumbo) | 60002 | CM225 |
| 9 3/4” x 15” (Super Jumbo) | 60002 | CM230 |
| 12” x 12” (Big) | 60005 | CM250 |
| 15” x 18” (Giant) | 60005 | CM250 |
| 26” x 9 3/4” (Super Long Cut) | 60004 | Unavailable |
| 26” x 13 3/4” (Super Giant) | 60008 | CM260 |
Use Cut & Crease Mats the same way as the alternative Cutting Plastic, but they last 10 times longer. They also provide a more defined crease when making cards, bags and boxes. Please note:
Use same size of Cutting Plastic or Cut & Crease Mat to match the die board size. To extend plastic and mat's life, use both sides.
Results may be better with Cutting Plastic vs. Cut & Crease Mats when using dies with crease blade with cardstock heavier than 80 lb. cover.
Only use Cutting Plastic when cutting fabric. Cut & Crease Mats are not recommended.
AccuQuilt GO! Dies (.472")
Refer to the chart below for which sizes of GO! dies will fit in various die-cutting machines.
| Machines | 5" x 10" | 6" x 6" | 6" x 12" | 10" x 10" | 6" x 24" | 10" x 24" | 14" x 16" |
| AccuQuilt GO! BIG Electric Fabric Cutter |
Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| AccuQuilt GO! Fabric Cutter | Yes | Yes | Yes | Yes | Yes | Yes | No |
| AccuQuilt GO! Baby Fabric Cutter | Yes | Yes | Yes | No | Yes | No | No |
| AccuQuilt Studio 2 Fabric Cutter and Original Studio Cutter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter |
| AccuCut GrandeMARK 2 and Original GrandeMARK | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter | With GO! Adapter |